The ZM single bucket vibration mill is mainly composed of several parts, including the chassis, body bracket, soundproof cover, body, grinding cylinder, exciter, lining plate, elastic material, grinding medium, and driving motor.     1. The chassis and body bracket are elastically supported to lift the body and maintain the flexible connection distance between the driving motor and the vibrating body unchanged.   2. The soundproof cover is used to block the noise emitted by the grinder during operation, in order to reduce the impact of noise on the entire work area.  3. The body is fastened with a grinding cylinder and equipped with an exciter.   4. The grinding cylinder is the working body of the vibrating mill, used to contain the grinding medium and abrasive.  5. The exciter is used to convert the rotational torque of the motor into periodic vibration of the mill.   6. The lining plate is tightly attached to the inner wall of the grinding cylinder to protect it. When vibrating and grinding materials inside the grinding cylinder, there is also significant wear on the inner wall of the grinding cylinder. Installing an easily replaceable lining plate inside the grinding cylinder can improve the service life of the entire machine.   7. Elastic support is used to keep the grinding machine body in an elastic state and basically isolate the vibration impact on the base when the body vibrates.  8. Grinding medium is the grinding theme of the grinder, used for impact grinding of materials.  9. Drive the motor to provide energy for the vibration grinding of the mill.The ZM single bucket vibration mill is driven by a motor through a flexible coupling to rotate the exciter, generating sufficient excitation force to cause the mill body to enter a cyclic vibration state. The oscillation force is continuously transmitted to all the materials loaded into the grinding cylinder (grinding medium and ground material), and the ground material is vibrated and ground through the mutual impact between the grinding medium and the ground material.    The ZM single bucket vibration mill is a small and medium-sized non explosive material grinding equipment, mainly used for fine and ultrafine material grinding in industries such as metallurgy, mining, building materials, refractory materials, abrasives, glass, ceramics, etc. Especially widely used in the production of chemical dyes, special ceramics, powder metallurgy, refractory materials and other products as raw materials for ultrafine processing. The ZM series vibration mill produces a variety of materials with particle sizes ranging from medium (0.3mm) to finer (0.074mm). It has high production capacity and good grinding performance. The best vibration mill materials are feldspar, magnesium, manganese, graphite, etc. Among them, the grinding effect of graphite and its similar materials is particularly ideal. The ZM-1 single bucket vibration mill is a small and medium-sized non flammable and explosive material grinding equipment, mainly used for fine and ultrafine material grinding in industries such as metallurgy, mining and building materials, refractory materials, abrasives, glass, ceramics, and metal industry grinding and calcination. It is widely used as a raw material for ultrafine processing in the production of chemical dyes, special ceramics, powder metallurgy, and refractory materials.